DESCRIPTION
Water-based emulsion of an acrylic copolymer, crosslinkable by solar rays. It appears as a white liquid. DECOUNION XL fixing emulsion is characterized by maintaining a perfect compromise between flexibility, elongation, tensile strength and very low external contamination.
MAIN FIELDS OF USE
- Waterproof, after 24 hours after application, it generates a waterproof film on the applied support.
- Tileable, it allows covering the applied membrane without deterioration, complying with watertightness standards.
- Adhesion, with high anchoring capacity on multiple construction supports. It improves the adherence of these substrates and prepares them to receive a new sprayed cork coating.
MAIN FIELDS OF USE
- Waterproof, after 24 hours after application, it generates a waterproof film on the applied support.
- Tileable, it allows covering the applied membrane without deterioration, complying with watertightness standards.
- Adhesion, with high anchoring capacity on multiple construction supports. It improves the adherence of these substrates and prepares them to receive a new sprayed cork coating.
TECHNICAL CHARACTERISTICS
| Solid content | 50 ± 1 % |
| pH | 7.5 ± 0.5 |
| Brookfield RVT Viscosity (2/50) | 100-500 mPas |
| Minimum film formation temperature | 0˚C approx. |
| Particle size | 0.3 µm approx. |
| Coloide protector | Colloid |
| Finish | Glossy |
| Residual monomer | <0.2 % |
| Solid content | 50 ± 1 % |
| pH | 7.5 ± 0.5 |
| Brookfield RVT Viscosity (2/50) | 100-500 mPas |
| Minimum film formation temperature | 0˚C approx. |
| Particle size | 0.3 µm approx. |
| Coloide protector | Colloid |
| Finish | Glossy |
| Residual monomer | <0.2 % |
HOW TO USE
- The support must be completely clean of dust, grease or other imperfections.
- Homogenize the content, stirring thoroughly.
- Apply by brush, roller or with the help of a fumigation backpack.
- On surfaces where waterproofing is not sought, the product can be diluted up to four parts of water. When we are looking for waterproofing, it must be applied directly without diluting.
- For a more guaranteed finish, it is possible to apply a second finish coat, allowing it to dry for a minimum of 12 hours between coats.
- Low temperatures or high humidity increase drying and application times between coats. Do not apply at temperatures below 0˚C, or at risk of rain.
- The yield of the material is 6 m2 per kg. in the case of application undiluted (waterproof) and 12 m2 per kg. in the case of diluted application (adherence).
