1.- Product identification

  • Trade name: DECOPROYEC
  • Main applications: Waterproofing, Thermal insulation, Acoustic conditioning, Decorative coating and Encapsulation of asbestos.
  • Packaging: Light plastic bags sealed manually and loaded into 12kg sealed buckets (21 liters). Product preparation consists on taking the product out from the package and stirring it with approximately 100ml of water until the adequate flowability and density is achieved.
  • Storage: Store in a cool, dry place at a temperature between -5°C and 40°C. Keep the package away from the sun and avoid frost. It is advisable not to store the product for over a year from the manufacturation date.
  • Application surface: Facades, terraces, roofs, walls and ceilings.
  • Application method: In order to apply DECOPROYEC correctly a filt-gun should be used. The surface must be dry, clean and sanitized. If there are any cracks or fissures they should be filled with putty prior application.
  • Health and Safety: DECOPROYEC is a natural product that doesn’t contain any toxic or dangerous products and requires no special precautions for its use and handling. The application equipment and tools can be cleaned with water and disposed according to local and national recommendations.

2.- Prodcuts features

Water vapor permeability (breathability) according to EN ISO 7783 Sd= 0,35 Class I Permeable to water vapor
Capillary absorption (EN 1062-3) and water permeability (UNE-EN 492) 0,21 kg/m2 h0,5 FULLY WATERPROOF
Adhesion (UNE-EN 1542:2000) 0,65 N/mm2
Reaction to fire UNE-EN ISO 4589-2 PRACTICALLY INCOMBUSTIBLE
Resistance to marine and saline environment (UNE-EN ISO 9227:2006) Follow UNE-EN ISO 9227:2006
Hazardous substances It has not, natural product.
Accelerated ageing (UNE-EN 11507) Type 1. Very light change, barely perceptible
Specific gravity 0.5 a 0.7 g/cm3
Tensile strength and elongation at break according to UNE-EN ISO 527-4 0,26 Mpa.  Elongation 34,6 %
Impact and shock resistance Resistant. No break
Thermal conductivity 0.050 W/m K
Touch-dry 120 min. and 20 ºC
Total drying 48 h. for layers of 3 mm and 20 ºC
Temperature tolerance -20 ºC and 177 ºC
Dinamyc rigidity (EN-29052-1) Until 19 dB
cubo-decoproyec
Water vapor permeability (breathability) according to EN ISO 7783 Sd= 0,35 Class I Permeable to water vapor
Capillary absorption (EN 1062-3) and water permeability (UNE-EN 492) 0,21 kg/m2 h0,5 FULLY WATERPROOF
Adhesion (UNE-EN 1542:2000) 0,65 N/mm2
Reaction to fire UNE-EN ISO 4589-2 PRACTICALLY INCOMBUSTIBLE
Resistance to marine and saline environment (UNE-EN ISO 9227:2006) Follow UNE-EN ISO 9227:2006
Hazardous substances It has not, natural product.
Accelerated ageing (UNE-EN 11507) Type 1. Very light change, barely perceptible
Specific gravity 0.5 a 0.7 g/cm3
Tensile strength and elongation at break according to UNE-EN ISO 527-4 0,26 Mpa.  Elongation 34,6 %
Impact and shock resistance Resistant. No break
Thermal conductivity 0.050 W/m K
Touch-dry 120 min. and 20 ºC
Total drying 48 h. for layers of 3 mm and 20 ºC
Temperature tolerance -20 ºC and 177 ºC
Dinamyc rigidity (EN-29052-1) Until 19 dB
cubo-decoproyec