DESCRIPTION
DECOIMPER is a liquid membrane with one-component water-based polyurethane for waterproofing and protecting roofs with / without traffic. Get a continuous layer, without joints, avoiding future leaks and humidity problems.
CHARACTERISTICS
- Passable, from 48-72 hours.
- Resistant, in any weather condition and to UV radiation, even with rain from 4 hours after application.
- Filling capacity, especially indicated in the repair of cracks and fissures, without wastage.
- Tileable, it allows covering the applied membrane without deterioration, complying with watertightness standards.
- Adhesion, with high anchoring capacity on multiple construction supports.
CHARACTERISTICS
- Passable, from 48-72 hours.
- Resistant, in any weather condition and to UV radiation, even with rain from 4 hours after application.
- Filling capacity, especially indicated in the repair of cracks and fissures, without wastage.
- Tileable, it allows covering the applied membrane without deterioration, complying with watertightness standards.
- Adhesion, with high anchoring capacity on multiple construction supports.
TECHNICAL CHARACTERISTICS
| Density | 1,32 kg./Lt |
| Elongation at break | 400% |
| Dry to touch | 30 min. |
| Overcoat drying | 45 min. |
| Total drying | 14 days |
| Viscosity | 150 KU |
| Solid content | 53% |
| Yield | 0,5-0,7 Lts/m2 |
| Density | 1,32 kg./Lt |
| Elongation at break | 400% |
| Dry to touch | 30 min. |
| Overcoat drying | 45 min. |
| Total drying | 14 days |
| Viscosity | 150 KU |
| Solid content | 53% |
| Yield | 0,5-0,7 Lts/m2 |
HOW TO USE
- The support must be completely clean of dust, grease or other imperfections.
- Homogenize the content, stirring thoroughly.
- Apply by brush, roller or airless spray.
- On cracked surfaces, a first coat with a 20% dilution of water is recommended.
- For an optimal finish, we recommend applying the product as it is presented, in two crossed layers, allowing it to dry for 6 hours between applications.
- For a more guaranteed finish it is possible to apply a third coat of finish.
- Non-slip surface treatment, apply a fresh quartz spray on the last layer.
- Low temperatures or high humidity increase drying and application times between coats. Do not apply at temperatures below 5˚, or with the risk of rain.
AVAILABLE COLOURS
White
Gray
Roof tile
Red
White
Gray
Roof tile
Red
