Spray gun for sprayed cork expressly designed for professional use due to its handling, easy operation and low air consumption. It is offered with a 5 liter polyethylene reservoir and a 6.00 mm nozzle. (5 mm nozzle available. not included).
Get a professional finish with a spray gun that adapts to the demands of our quality sprayed cork. It is recommended to use a pressure of 3.5 to 4 bars (fine grain size at 6-7 bars).
We have designed an exclusive elbow (not included) that allows you to paint ceilings and floors with the tank always in a vertical position without the risk of spillage and accidental loss of material.
Easy to maintain, it is advisable to clean with plenty of water at the right moment after the work is finished (gasket set available) and wash every 6 months with a cloth and solvent.
If your works are usually 200 m2 or more we recommend using our Europro 8P projection machine.
Applications with sprayed cork, textile coverings, etc. on medium-sized surfaces.
| Nozzles | 6 mm. (optional 5 and 8 mm.) |
| Body | Anodized exterior treatment |
| Air consumption | 110 l/m at 2,5 bar 125 l/m at 3 bar |
| Tank capacity | 0˚C approx.5 Liters nylon |
| Weight | 0.3 µm approx.605 gr. |
| Air inlet | CR 1 / 4 |
| Product feeding | Gravity |
| Operation | Valve / air continuos |
| Nozzles | 6 mm. (optional 5 and 8 mm.) |
| Body | Anodized exterior treatment |
| Air consumption | 110 l/m at 2,5 bar 125 l/m at 3 bar |
| Tank capacity | 0˚C approx.5 Liters nylon |
| Weight | 0.3 µm approx.605 gr. |
| Air inlet | CR 1 / 4 |
| Product feeding | Gravity |
| Operation | Valve / air continuos |
